Skip to content

Get in touch

T: 1800 339 638

effective isolation of noise and vibration generated from equipment

A selection of resilient hangers is an integral part of the total isolation system design, and the deflection of hangers for pipes and ductwork immediate to the equipment should be similar to the isolators supporting the equipment.

For assistance in selecting the correct isolator suitable to your application, please use our Isolator Selection Guide.

Isolator Selection Guide Mechanical Isolation Catalogue

ISOLATION HANGERS

Rubber Isolation Hanger

Where a low cost, low deflection hanger is required for effective isolation of noise and vibration from equipment with speeds of 1,000 RPM upwards. Typically used for piping, ductwork, fans, packaged air conditioners, fan coil units and suspended ceilings.

Product Datasheet

ISOLATION HANGERS

Spring Isolation Hanger

For support of equipment and pipework where a low cost hanger is required for effective isolation of vibration. Typically used for support of piping and ducts, fans, packaged air conditioners, fan coil units, attenuators and headers.

PRODUCT DATASHEET

ISOLATION HANGERS

Rubber and Spring Series Isolation Hanger

For support of pipework and equipment with speeds down to the order of 500 RPM requiring effective isolation of both mechanical vibration and acoustic level frequencies. Typically used for support of piping and ducts, flow speed fans, packaged air conditioners and attenuators.

Product Datasheet

ISOLATION HANGERS

Isolation Hanger Elements

RHE/RHDE, KDXS, KDX, KDXW

Required for effective isolation of noise and vibration from equipment, isolation hanger spring and rubber elements are typically used for trapeze-supported piping, packaged air conditioners, fan coil units and fans; particularly where height limitations are present.

Product Datasheet

ISOLATION HANGERS

Expansion Control Isolation Hangers

For the support of piping where considerable vertical movement is experienced through thermal variations, allowing minimal transfer of loads to anchor points. The Expansion Control Isolation hanger is typically used on risers in multi-storey buildings and in high temperature piping systems.

Product Datasheet