Back


CEILING HANGER TYPE LHB/LHBS

CEILING ISOLATION

Load Range: 17-55kg
Maximum Static Deflection: 5-8mm

APPLICATION

Typically used for suspended architectural ceilings, where a low cost, low deflection, medium to heavy duty hanger is required for the effective isolation of noise and vibration from the levels above and below the ceiling.

The LHB/LHBS Bracket is designed for fixing to the side of joists and purlins and is available in a full height (LHB) and short height (LHBS) version. The LHBS version is typically used for Hyspan beams.

FEATURES

• Static deflection ranges from 5mm to 8mm in single deflection (CHE, RHE) or double deflection (RHDE)
• The active element is colour coded for easy identification of load range
• Sturdy galvanised heavy duty steel bracket, with a shorter LHBS option available
• If mechanical or fire damage occurs, metal plates in the hanger element interlock so that complete loss of support is less likely

SPECIAL FEATURES

The element can be permanently fastened into the cage using a rebound washer so that no dislocation will occur if ceiling panels are lifted for entry into service space.